Wear restrictive hair covering to contain long hair. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines. SKU 92622 For technical questions, please call 1-800-444-3353 Specifications Description 1,400 FT./LBS.
Page 3
This helps maintain tool stability and keeps hands away from the working area of the tool. Note: Performance of this tool may vary depending on variations in air compressor perfor- mance. SKU 92622 For technical questions, please call 1-800-444-3353 Page 3...
Page 4
D-type Handle (49) Allen Wrench Cap Screws (50) If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. SKU 92622 For technical questions, please call 1-800-444-3353...
Page 5
The filter and oiler (not supplied) are recommended but not mandatory for operation. A few drops of pneumatic tool oil must be added through the air line before each use if an oiler is not used. SKU 92622 For technical questions, please call 1-800-444-3353 Assembly...
Page 6
Remove the air supply hose, then squeeze the Trigger (2) again to release any remaining air pressure in the Impact Wrench air chamber. 10. Turn off the air compressor. SKU 92622 For technical questions, please call 1-800-444-3353 Operation Air Inlet (10)
Store the Impact Wrench in a clean and dry location. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 92622 For technical questions, please call 1-800-444-3353 Maintenance Parts List...
Page 8
BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Page 8 SKU 92622 For technical questions, please call 1-800-444-3353...
Need help?
Do you have a question about the 92622 and is the answer not in the manual?
Questions and answers