MTD 240 Series Operator's Manual
Front tine tiller
Hide thumbs
Also See for 240 Series:
- Operator's manual (41 pages) ,
- Operator's manual (28 pages) ,
- Operator's manual (28 pages)
Table of Contents
Advertisement
Quick Links
Safety • Assembly • Operation • Tips & Techniques • Maintenance • Troubleshooting • Parts Lists • Warranty
OPERATOR'S MANUAL
Model 241 shown
Front Tine Tiller — Model Series 240
IMPORTANT
READ SAFETY RULES AND INSTRUCTIONS CAREFULLY BEFORE OPERATION
Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-
covered or grass-covered land unless the engine's exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any).
If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law
(Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester
for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 361131 Cleveland,
Ohio 44136-0019.
FORM NO. 769-02153A
MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
3/2/2006
PRINTED IN U.S.A.
Advertisement
Table of Contents
Related Manuals for MTD 240 Series
Summary of Contents for MTD 240 Series
- Page 1 (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-0019. FORM NO. 769-02153A MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 3/2/2006 PRINTED IN U.S.A.
-
Page 2: Table Of Contents
This Operators Manual covers a range of product specifications for various models. Characteristics and features discussed and/or illustrated in this manual may not be applicable to all models. MTD LLC reserves the right to change product specifications, designs and equipment without notice and without incurring obligation. -
Page 3: Safety Labels
Safety Labels Found On Your Tiller WARNING WARNING Safety TO AVOID SERIOUS INJURY 1. READ THE OPERATOR'S MANUAL. Labels 2. KNOW LOCATION AND FUNCTIONS OF ALL CONTROLS. 3. KEEP ALL SAFETY DEVICES AND SHIELDS IN PLACE AND WORKING. 4. NEVER ALLOW CHILDREN OR UNINSTRUCTED ADULTS TO OPERATE TILLER. -
Page 4: Operation
WARNING: Engine Exhaust, some of its constituents, and certain vehicle compo- nents contain or emit chemicals known to State of California to cause cancer and birth defects or other reproductive harm. DANGER: This machine was built to be operated according to the rules for safe operation in this Safe manual. - Page 5 Your Responsibility 16. Do not overload machine capacity by attempting to till soil to deep at too fast of a rate. 1. Restrict the use of this power machine to persons who read, 17. If the machine should start making an unusual noise or understand, and follow the warnings and instructions in this vibration, stop the engine, disconnect the spark plug wire manual and on the machine.
- Page 6 Assembly 4. Insert left end of tine clutch control into the 1. Remove the star handle knobs and carriage hole on the left side of the upper handle, bolts from the lower handle, Figure 3-1. Figure 3-3. Assembly Stand behind the tiller as if you were going to operate it.
- Page 7 6. Squeeze the tine clutch control inward. Insert right end into the hole on the right side of the upper handle, Figure 3-5. Assembly Stand behind the tiller as if you were going to operate it. Your right hand corresponds to the right side of the tiller;...
-
Page 8: Throttle Control
Know Your Tiller Operating Tine Your Tiller Clutch Control Recoil Starter Clutch Cable Handle Knobs Rear Wheel with Depth WARNING Stake The tine clutch control is a safety device. Never attempt to bypass its Tines operation. Use extreme care when Figure 4-1: The major parts of the tiller (model 241 shown). -
Page 9: Before Starting
many other useful labor saving tasks in the garden. After WARNING: Read, understand, and follow engine is running and appropriate speed set on throttle all instructions and warnings posted on the (if equipped), squeeze tine clutch control (see Figure 4-1) machine and in this manual before operating. - Page 10 For tilling, the depth stake must be lowered and the wheel must be raised, Figure 4-4. By increasing the depth of the depth stake, the forward speed of the machine is reduced and the working depth is increased. When the depth stake is raised, the working depth of the machine is reduced and the forward speed Operating is increased.
- Page 11 will be free of hard untilled spots, allowing a better stand of grass to grow. The tiller is very useful for loosening hard soil for excavation with a shovel; No tedious handwork will be necessary. Your tiller may be used for mixing compost in the pile or for mixing it with the soil in your garden.
-
Page 12: Adjustments
Making Adjustments Warning: Disconnect the spark plug wire and ground it against the engine before performing Adjustments any adjustments. Engine Adjustment Refer to the separate engine manual for engine 24-inch adjustment instructions. Tine Width Adjustment The tilling width of the unit is 22 inches. Tilling width can increase to 24 inches by removing the clevis and cotter pins, sliding each outer This manual may cover... -
Page 13: Maintenance
It should not be replaced with an off-the-shelf belt. See machine. the retailer from which you purchased your tiller, an authorized MTD Service Dealer, or call 1-800-800-7310 Maintaining Engine for information regarding price and availability. -
Page 14: Troubleshooting
Problem Cause Remedy Engine fails to start 1. Spark plug wire disconnected. 1. Connect wire to spark plug. 2. Fuel tank empty or stale fuel. 2. Fill tank with clean, fresh gasoline. 3. Throttle control lever not in correct 3. Move throttle lever to start position. Trouble starting position (if equipped) 4. -
Page 15: Off-Season Storage
Off-Season Storage • Refer to the engine manual for correct engine storage If the tiller will not be used for a period longer than 30 instructions. days, the following steps should be taken to prepare the tiller for storage. • Wipe tines with oiled rag to prevent rust. •... - Page 16 � �� �� � �� � �� �� � �� �� � �� �� �� � �� �� � �� � � �� � �� �� �� �� �� �� �� �� �� �� �� �� �� � �� �� ��...
-
Page 17: Parts List
749-04282 Upper Handle 720-04072 Star Handle Knob 749-04281 Lower Handle 710-04398 Flange Screw 5/16-18 x 7.5 754-04123 Belt Parts List 756-04163 Idler Pulley 748-04125 Shoulder Spacer 686-04080 Idler Bracket 712-04065 Flange Lock Nut: 3/8-16 10 710-0654A TT Screw 3/8-16 x 1.00 11 786-04303 Frame 12 710-0514... -
Page 18: Warranty
MANUFACTURER’S LIMITED WARRANTY FOR The limited warranty set forth below is given by MTD LLC with respect e. MTD does not extend any warranty for products sold or exported to new merchandise purchased and used in the United States, its outside of the United States, its possessions and territories, except possessions and territories.