OSD Menu (continued)
Chapter 4 Operating the Monitor
Allows the computer to control some OSD menu features such
as brightness, contrast and color temperature. Set to:
The factory default is On.
Provides the timer adjustment menu options:
Adjusts the position of the OSD menu on the screen.
Changes the viewing position of the OSD menu to the left or
right area of the screen. The factory default range is 50.
Changes the viewing position of the OSD menu to the top or
bottom area of the screen. The factory default range is 50.
Sets the time duration in seconds that the OSD is visible after
the last button is pressed. The factory default is 30 seconds.
Adjust to view the background information through the OSD.
Selects and displays important information about the monitor.
Provides the current input video mode.
Provides the recommended resolution mode and refresh rate
for the monitor.
Reports the serial number of the monitor. The serial number is
needed if contacting HP technical support.
Reports the firmware version of the monitor.
Reports the total hours of backlight operation.
Selects the default or primary video input signal when the
monitor is connected to two active and valid video sources. The
monitor will automatically determine the video format. The
default input selection is DVI.
Selects DVI-I 1 input. This input accepts either analog or digital
Selects DVI-I 2 input. This input accepts either analog or digital
Set Current Time—sets the current time in hours and
Set Sleep Time—sets the time you want to place the
monitor in sleep mode
Set on Time—sets the time you want the monitor to wake
up from sleep mode
Timer—sets the Sleep Timer feature On or Off. The default
setting is Off
Sleep Now—immediately sets the monitor to enter sleep