Download  Print this page

HP LP1965 User Manual Page 22

19", 20" and 24" lcd monitors.
Hide thumbs


Mount the Quick Release to a swing arm or other mounting fixture using the four screws
removed from the Quick Release in the previous step.
Figure 3-16
monitor panel. It is designed to support a maximum of up to 24 lbs. (10.9 kg). If you are
mounting to a wall, HP recommends that you consult with a qualified engineering,
architectural, or construction professional to determine the appropriate type and quantity
of mounting fasteners required for your application and to ensure that the mounting
solution is properly installed to support applied loads.
Insert the monitor panel into the Quick Release, and then press down firmly on the monitor to
lock it in place. When the Quick Release locks, it will make a clicking sound.
Figure 3-17
Chapter 3 Setting Up the Monitor
Installing the Quick Release
The Quick Release can also be installed directly to a wall to mount the
Inserting the Monitor Panel into the Quick Release


Table of Contents

   Related Manuals for HP LP1965

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: