Download  Print this page

Using The Auto-adjustment Function - HP LP1965 User Manual

19", 20" and 24" lcd monitors.
Hide thumbs


Using the Auto-Adjustment Function

You can optimize the screen performance for the VGA (analog) input by using the -/Auto button on
the monitor and the auto-adjustment pattern software utility on the CD provided.
Do not use this procedure if the monitor is using a DVI input. If the monitor is using a VGA (analog)
input, this procedure can correct the following image quality conditions:
Fuzzy or unclear focus
Ghosting, streaking or shadowing effects
Faint vertical bars
Thin, horizontal scrolling lines
An off-center picture
To use the auto-adjustment feature:
Allow the monitor to warm up for 20 minutes before adjusting.
Press the
You can also press the
Main Menu. Refer to
If the result is not satisfactory, continue with the procedure.
Insert the CD in the disc drive. The CD menu is displayed.
Select Open Auto-Adjustment Software . The setup test pattern is displayed.
Press the
Press the
button on the monitor front panel.
Adjusting the Monitor Settings
button on the monitor front panel to produce a stable, centered image.
key or any other key on the keyboard to exit the test pattern.
button, then select Auto-Adjustment from the OSD
in this chapter.
Using the Auto-Adjustment Function


Table of Contents

   Related Manuals for HP LP1965

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: