Download  Print this page

German Ergonomics Notice; Japanese Notice; Korean Notice; Power Cord Set Requirements - HP LP1965 User Manual

19", 20" and 24" lcd monitors.
Hide thumbs


German Ergonomics Notice

HP products which bear the "GS" approval mark, when forming part of a system comprising HP
brand computers, keyboards and monitors that bear the "GS" approval mark, meet the applicable
ergonomic requirements. The installation guides included with the products provide configuration

Japanese Notice

Korean Notice

Power Cord Set Requirements

The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the
monitor to operate on input voltages between 100–120V or 200–240V.
The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for
use in the country where you purchased the equipment.
If you need to obtain a power cord for a different country, you should purchase a power cord that is
approved for use in that country.
The power cord must be rated for the product and for the voltage and current marked on the
product's electrical ratings label. The voltage and current rating of the cord should be greater than
the voltage and current rating marked on the product. In addition, the cross-sectional area of the wire
must be a minimum of 0.75 mm² or 18 AWG, and the length of the cord must be between 6 feet (1.8
m) and 12 feet (3.6 m). If you have questions about the type of power cord to use, contact an
authorized HP service provider.
A power cord should be routed so that it is not likely to be walked on or pinched by items placed
upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point
where the cord exits from the product.
*Notified body number (used only if
applicable — refer to the product label).
German Ergonomics Notice


Table of Contents

   Related Manuals for HP LP1965

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: