Lan Board - Toshiba Satellite U300 Series Maintenance Manual

Replacement Procedures
Figure 4-23 Removing the Audio Board
Installing the audio board
1. Insert the audio board into base case and connect audio board cable, speaker cable and
audio FFC cable
2. Fix the below screws
M2.0x4.0 FLAT BIND screw x1
NOTE: Be careful not to catch the cables between cover assembly and base assembly.

4.13 LAN Board

The following describes for removing the LAN board (See Figure 4-24).
Removing LAN board
1. Remove the modern cable and audio FFC cable
2. Loose below screw from USB board then incline pull out lan board
M2.0x5.0 FLAT BIND screw x2
Figure 4-25 Removing the LAN board
Installing the LAN Board
4-40
Satellite U300 and Satellite Pro U300 Maintenance Manual (960-Q08)