Electrical Connections; 3-Wire Branch Circuit - Bosch HBN 44 Series Installation Instructions Manual

ELECTRICAL CONNECTIONS

This appliances is manufactured with a green
GROUND wire connected to the oven chassis.
After making sure that the power has been turned
off connect the flexible conduit from the oven to
the junction box using a U.L. listed conduit con-
nector. Figures A and B and the instructions pro-
vided below present the most common way of
connecting the ovens. Your local codes and ordi-
nances, of course, take precedence to these in-
structions. Complete electrical connections ac-
cording to local codes and ordinances.
4-WIRE BRANCH CIRCUIT
Refer to Figure B:
•
Connect the green GROUND wire from the
oven to the GROUND wire in the junction box
(bare or green colored wire).
10

3-WIRE BRANCH CIRCUIT

Refer to Figure A, where local codes allow the
connection of GROUND wire from the oven to
the branch circuit NEUTRAL wire (grey or white
colored wire):
•
If local codes permit, connect the green
GROUND wire from the oven and the white
wire from the oven to the branch circuit NEU-
TRAL wire (grey or white colored wire).
•
Connect the red and black leads from the oven
to the corresponding leads in the junction box.
Figure A.
•
Connect the red and black leads from the oven
to the corresponding leads in the junction box.
•
Connect the white wire from the oven to the
NEUTRAL (grey or white) wire in the junction
box.
Figure B.