Double Oven - Bosch HBN 44 Series Installation Instructions Manual

WALL INSTALLATION, DOUBLE OVEN
Note: 1. Do not slide oven across floor. Dam-
age to floor covering or floor could re-
sult.
2. The oven support surface must be a
minimum 3/4" thick plywood plat-
form, solid, level and flush with the
bottom of the cabinet cutout.
3. Use extreme caution when moving or
installing the oven. It is very heavy.
4. Be very careful when moving or in-
stalling the oven to avoid damage to
the oven frame or damage to the cabi-
nets.
5. Be sure to level oven. An oven that is
not level may provide poor or incon-
sistent baking results.
Electrical
supply
junction box
Securely fasten oven to cabinet using the
screws provided. Failure to do so could result
in oven moving or tipping during use and
causing damage to the oven or cabinets or per-
sonal injury.
Secure oven to cabinet using the screws
provided. Screws should be inserted
through the mounting holes in the
positions indicated in the frame (open
door to see frame and mounting holes).
Do not overtighten screws.
6. Be careful when placing oven. DO
NOT pinch the conduit between the
oven back or wall and the inner cabi-
net wall or floor.
WARNING
7