Reinstalling Or Replacing The Bellows - GE WSSH300G Technical Service Manual

4. Remove the bellows by placing your hand under
the bellows at the top of the opening and lift up
while pulling out.

Reinstalling or replacing the bellows:

1. Use liquid dishwasher soap to lubricate the groove
on the bellows to make it easier to slip lip of the
bellows onto the lip of the tub.
2. There is a tab and an arrow on the top of the tub lip
and a slot in the groove and an arrow at the
top of the bellows.
3. Place the slot over the tab and, while holding the
bellows in place with one hand, place the other
hand inside the bellows and force the groove of
the bellows over the lip of the tub with your thumb.
39