Wheel Kit Installation - Honda EU6500is Owner's Manual

Wheel Kit Installation

Do not operate the generator without the wheel kit installed. The
wheel kit provides an air space between the ground and the generator
air intake.
If the wheel kit is not installed, it may be possible for dirt and debris to
be drawn into the generator air intake, possibly causing generator
damage. Always operate the generator with the wheel kit installed.
1. Install the two wheels on the axle using the 20 mm washers and
4.0 28 mm cotter pins.
2. Install the axle assembly on the generator using four 8 mm washers
and 8 25 mm flange bolts.
3. Install the two stands on the under frame using four 8 mm washers
and 8 25 mm flange bolts.
TORQUE: 17 22 lbf·ft (24 29 N·m , 2.4 3.0 kgf·m)
8 mm WASHER (4)
(t = 6 mm)
8 16 mm
FLANGE BOLT (4)
STAND
WHEEL (2)
8 16 mm FLANGE BOLT (4)
S S H H O O R R
8 mm WASHER (4)
(t = 2.3 mm)
AXLE
20 mm WASHER
ASSEMBLY
T T E E R R
4.0 28 mm
COTTER PIN (2)
81