Fuse - Honda EU6500is Owner's Manual

FUSE

If the fuse is blown, the starter motor won't operate.
In the event of fuse failure, locate the cause of failure and repair it
before you continue operation. If the fuse continues to fail, discontinue
generator use and consult an authorized Honda generator dealer.
1. Turn the engine switch to the OFF position and remove the key
before checking or replacing the fuse.
Loosen the cover screw and
2.
remove the battery
maintenance cover.
3. Remove the fuse holder cover
and pull the fuse out.
4. Replace the fuse with a
fuse of the same type and
rating.
Specified fuse:
Never use a fuse with a
different rating from that
specified. Serious damage to
the electrical system or fire
may result.
5. Install the fuse holder cover and the battery maintenance cover in
the reverse order of removal (see page
Never operate the generator without the maintenance cover in place,
as poor engine and generator performance will result.
SERVICING YOUR GENERATOR
1 A, 15 A
FUSE (1A)
FUSE (15A)
FUSE HOLDER COVER
56 ).
BATTERY
MAINTENANCE
COVER
COVER
SCREW
59