Downloading Firmware - Kyocera FS-2000D Service Manual

1-6 Firmware
1-6-1

Downloading firmware

The system firmware can be update by downloading new firmware. Downloading can be made either by directly sending
the new firmware from PC via the parallel interface or using a memory card that contains the new firmware.
Firmware file name example
Product code
2F8: 30/31 ppm printer (EUR/USA model)
2F9: 35/37 ppm printer (EUR/USA model)
2GA: 45/47 ppm printer (EUR/USA model)
NOTE:
Main controller firmware "2F9" should
be used since 35/37 ppm printer and
45/47 ppm printer are identical.
Software ID
S 2 F 8_1 0 0 0 0 0 1 0 2 1 . c m p
Pause (under bar)
Figure 1-6-1
Build number
Update history
Classification (Normally: 0)
Supplement (Normally: 00)
Firmware category
10: Engine controller
30: Main controller
2F8/2F9/2GA-1
Compression
Pause (period)
1-6-1