DFI G486VPC User Manual page 46

MEMORY SIZE HAS CHANGED SINCE LAST BOOT
Memory has been added or removed since the last boot. Enter Setup
and enter the new memory size in the memory fields.
MEMORY VERIFY ERROR AT...
Indicates an error verifying a value already written to memory. Use the
location along with your system' s memory map to locate the bad chip.
OFFENDING ADDRESS NOT FOUND
This message is used in conjunction with the I/O CHANNEL CHECK
and RAM PARITY ERROR messages when the segment that has
caused the problem cannot be isolated.
OFFENDING SEGMENT
This message is used in conjunction with the I/O CHANNEL CHECK
and RAM PARITY ERROR messages when the segment that has
caused the problem has been isolated.
PRESS A KEY TO REBOOT
This will be displayed at the bottom screen when an error occurs that
requires a reboot. Press any key and the system will reboot.
PRESS F1 TO DISABLE NMI, F2 TO REBOOT
When BIOS detects a Non-Maskable Interrupt condition during boot,
this will allow NMI to be disabled and continue to boot. You can also
reboot the system with the NMI enabled.
SYSTEM HALTED, (CTRL-ALT-DEL) TO REBOOT...
Indicates the present boot attempt has been aborted and the system
must be rebooted. Press and hold down the CTRL, ALT and DEL keys
simultaneously.
46