Setting Up For Timer-Activated Function - Sony MDS-B5 Operation Manual

7-3 Setting Up for Timer-Activated Function

Use the Setup menu to use the timer-activated
recording or playback function connecting the MDS-
B5 to the timer.
Timer
To an AC outlet
Connecting a timer
To set the timer-activated function
= +
0 )
p (P r
MDS-B5
1
Press the EDIT/NO button while holding down the
STOP button.
The Setup menu appears.
2
Turn the AMS control until the menu item F10
("Timer off", "Timer Play" or "Timer Rec")
appears.
3
Press the AMS control.
The indication flashes to show that you can change
the setting.
4
Turn the AMS control to select the timer-activated
mode from the values below.
Timer off: Timer-activated function is disabled.
Timer Play: Timer-activated playback is set.
Timer Rec: Timer-activated recording is set.
5
Press the AMS control to affect the selection and
exit from the Setup menu.
Notes
• After a head- or end-trimming operation, be sure to
update the TOC before performing timer-activated
playback.
• In the case of premastered discs, head- or end-
trimming will not take place during timer-activated
playback. You should thus divide the tracks to
specify the start and end of playback.
0
p (P r
1
F10
T i m e r o f f
Chapter 7 Setup Menu
= +
)
2 – 5
7-3