Playing Tracks Repeatedly - Sony MDS-B5 Operation Manual

5-5 Playing Tracks Repeatedly

You can use the Setup menu to select Repeat Play
mode.
The Repeat Play mode can be used with all other
playback modes.
When either AUTO PAUSE or AUTO CUE is
activated during Repeat Play
The MD deck enters playback pause at the beginning
of the track (or when the audio signal rises).
To select Repeat Play mode
p (P
1
1
Press the EDIT/NO button while holding down the
STOP button.
The Setup menu appears in the display.
2
Turn the AMS control to display menu item F03
("Repeat Off" or "Repeat On").
F03
R e p e a t O f f
3
Press the AMS control.
The indication flashes to show that you can change
the setting.
5
= +
0 )
r
2,3,4
4
Turn the AMS control clockwise to display
"Repeat On", then press the AMS control.
The "REPEAT" indication lights.
Turning the AMS control counterclockwise
changes the setting back to "Repeat Off."
F03
R e p e a t O n
5
Press the EDIT/NO button to exit from the Setup
menu.
Pressing the PLAY/PAUSE button starts the
repeated playback of tracks.
To play only one track repeatedly
Press the SINGLE button during the Repeat Play
mode.
The "REPEAT1" indication lights.
F03
R e p e a t O n
"REPEAT" indication
"REPEAT1" indication
5-7
Chapter 5 Playback