To Remove The Basket; Reclining Seat & Basket - Baby Jogger City Elite Assembly Instructions Manual

reClining seat & basket
1
To recline: Pinch the clamp behind the seat, and slide it down
to desired recline. Pull seat down on both sides to match recline
position of clamp.
Reverse to return to the upright position.
The basket of your City Elite comes fully attached.

To remove the basket:

1
From the front of the stroller: Unfasten Velcro on
lower seat fabric to expose the bottom front portion
of frame. Unfasten basket Velcro from around the
frame tubing. Velcro seat fabric back to stroller
frame once complete.
8
• Weather Cover: If desired, pull
weather cover down and over
the seat back mesh. Secure
firmly over both sides of seat.
When not in use, roll weather
cover up and fasten with elastic
loop and barrel provided under
the top of the seat fabric.
2
From the rear of the stroller: Unsnap the top snaps
of the basket from around the frame tubing above
the middle crossbar. Unsnap the bottom snaps of
the basket from around the frame tubing below
the middle crossbar.