See Fig. - JVC UX-J55V Service Manual

3.1.5 Removing the tuner board

(See Fig.7)

• Prior to performing the following procedure, remove the metal
cover.
(1) Disconnect the card wire from the connector
tuner board.
(2) Remove the two screws H on the rear side and the screw
J in the side.
3.1.6 Removing the VCD mechanism assembly
(See Fig.8)
• Prior to performing the following procedure, remove the metal
cover, the rear cover, the rear panel and the tuner board.
(1) Disconnect the card wire from the connector CN903,
CN902 and CN904 on the main board.
(2) Pull the joint e in the direction of the arrow and remove the
VCD mechanism assembly backward while releasing the
joint f .
1-10 (No.MB057)
CN1 on the
J
VCD mechanism assembly
Main board
Tuner board
CN1
Fig.7
e
f
CN904
CN902
Fig.8
H
e
CN903