Table of Contents
Advertisement
The interference of video playing is as the follows.
Play/Pause Stop Prev/Next
Full screen Exit
Please note: the playing axis will not work
here. Therefore, we can not push it to play
forwards or backwards.
In the interference of video playing, the messages
of playing can be shown, including the current
playing improvement & current playing time. And we can
operate the playing as we like, for example,
pause/stop/close the video file or display the image full
of screen. Click the"
" for full screen display.
While the image is displaying full of screen, touch the
display area of image to get back to the normal display
area.
3.2.3 Picture
Click "Picture" icon and the system will show
the following menu. There we can read, delete or even
revise the files in the system or USB flash memory. The
compatible file formats include BMP/JPEG/GIF/PNG.
Full screen 16:9/4:3 Auto
Prev/Next
Exit
3.3 Navigation
Click "Navigation" icon or press "navi" on the remote
to activate GPS navigation function. Please refer to the
manual of GPS navigation for details.
Attention:
Attention:
1. GPS Navigation: The files in "Navione" file folder
are navigation programs. Never delete any file in it.
Otherwise, it will lead to program exception.
2. Update of map: Please store the updating file in the
USB flash memory.
3.4 Rear view camera
The rear view function is only an assistant function
for parking. It can not be the basis for a judgment.
Once the car is reversing (the shift lever is located
on R place), the display of the system will shift to display
the images from the rear view camera, no matter what
current image it is. Once the car finishes backing up,
the image displayed by the system will go back to the
former image.
Please note that the playing of MP4 will be stopped,
if the system shifts to the rear view image while MP4
is playing.
While the system is standing by, the reversing of car
can let the TFT display open automatically & the rear
view image will be visible. After car stops reversing,
the system will go back the interference of OSD. And
then the system will go back to the standby condition after
5 seconds.
3.5 TV
Click "TV" icon of OSD to activate the function
of TV and then the system will enter TV interf erenc e.
As different TV module may have different TV
operation interference, we will not describe it
specifically. Please operate according to the actual
TV module.
3.6 DVD Player
Our system can work with DVD changer or DVD
player, which can be controlled by touch panel.
(But pleas e not e, th e system cannot control the DVD
or DVD changer, until our system has do ne suitable
software to match the remote code of DVD changer
or DVD player).
3.7 Setup
Click "Setup" icon to enter into the interference of
"setup". There we can setup date/time, parameter of
volume, system message & calibration of touch panel etc.
Advertisement
Table of Contents
