Basic Wireless Setup; Wireless Advanced Settings - ActionTec GT704WG User Manual

Basic Wireless Setup

To perform a basic setup of a wireless network using the Gateway:
1. In the "Wireless Basic Settings" screen, turn the Gateway's wireless radio on by
2. Create a name for the wireless network and enter it in the "
3. Select a channel from the "Channel" drop-down menu. In the United States,
4. Activate
5. Create a 64-bit
6. Write down the Gateway's wireless settings. To connect other devices to the

Wireless Advanced Settings

To access the Gateway's wireless advanced settings screens, select Advanced
Settings from the menu on the left side of the "Wireless Basic Settings" screen.
Downloaded from www.Manualslib.com
Chapter 5 Configuring Wireless Settings
selecting On.
use channels 1-11.
(Wired Equivalent Privacy) to secure the wireless network by
WEP
selecting WEP.
key by selecting 64-bit WEP Key from the "select a
WEP
Key" drop-down menu, then entering a 10-digit key in the "Key Code" text
box. The digits can be any letter from
wireless network, the devices' wireless settings must match the Gateway's wire-
less settings exactly. Check the "Current Wireless Status" box (available in any
wireless setting screen) to view the Gateway's wireless status and settings.
manuals search engine
, and any number from 0-9.
A-F
21
" text box.
ESSID
WEP