Performing A Basic Setup - ActionTec GT704 User Manual

Usb/ethernet dsl gateway
Hide thumbs Also See for GT704:
Table of Contents

Advertisement

Performing a
Basic Setup
This chapter is a guide through a basic setup of the Gateway. The Basic Setup
includes instructions on how to connect the Gateway to the
adnim user name and password.
To complete a basic setup, the user will need information provided by the
information is sometimes contained in a welcome letter or
document is not available, contact the
Basic Setup
To configure the Gateway for basic operation:
Note: If you already set up the Gateway using the Installation
Buddy (as described in Chapter 2, "Setting Up the Gateway"), the
settings described in this section have already been configured. To
change the advanced settings of the Gateway, go to Chapter 4.
1. Open a Web browser. In the "Address" text box, type
then press Enter on the keyboard.
2. The "Main Menu" screen appears. Select Setup/Configuration.
ISP
http://192.168.0.1
31
ISP
immediately and request one.
3
and changing the
ISP
. This
ISP
worksheet. If this

Advertisement

Table of Contents
loading

Table of Contents