Performing A Basic Setup - ActionTec GT701-WG User Manual

Performing a
Basic Setup
This chapter is a guide through a basic configuration setup of the Gateway for
users who did NOT use the Actiontec Installation Buddy® to setup the Gateway.
The basic setup includes instructions on how to connect the Gateway to the
and change the user name and password.
To complete a basic setup, the user will need information provided by the
access the Gateway's Web Configurator. This information from the
times contained in a welcome letter or
able, contact the
ISP
Basic Setup
☞
Note: If you already set up the Gateway using the Installation
Buddy (as described in Chapter 2, "Setting Up the Gateway"), the
settings described in this section have already been configured.
Please continue to chapter 4, "Using Advanced Setup," to configure
the advanced settings of the Gateway.
1. Open a Web browser. In the "Address" text box, type
then press Enter on the keyboard.
2. The Web Configurator's "Main Menu" screen appears. Select Setup/
Configuration.
immediately and request one.
http://192.168.0.1
worksheet. If this document is not avail-
ISP
31
3
ISP
and
ISP
is some-
ISP