Table of Contents
Advertisement
1. Measure and mark a level line on wall above cooktop
location for the wood mounting strip (see illustration
to the right and under step 2 on page 7). Unscrew the
mounting strip from the hood and discard the screws.
Use #10-2" flat head screws (included in the parts bag) to
secure the mounting strip to the drywall. Make sure to hit
the wall studs.
CAUTION: Due to the weight of this hood,
!
ensure that the wood strip is attached to all of
the available wall studs (2 studs minimum for
the 30
hood, more for a 36'' hood); not into
"
drywall alone.
2. Remove filters from hood and set aside.
3. Using a Phillips #2 or a Robertson #2 screwdriver, remove
4 screws retaining the pan to the hood (shaded part on
illustration beside) and set aside.
PREPARE THE HOOD
1. Drywall
2. Wood Mounting Strip
3. Flat Head Screw
4. Wall Anchor Location
5. Outline of the Back of the Hood
6. Wall Studs
HD0172
HD0170
8
HD0169A
DELAY
OFF
R
ETAINING SCREWS LOCATION
T
(
)
OP OF HOOD
INSIDE VIEW
Advertisement
Table of Contents
