1-1. CABINET REMOVAL
EMI shield
7
Push in the tip of a screwdriver
about 10mm to unlock the claw.
Cabinet
Bezel assembly
Three screws
5
(+BVTT 4 x 8)
SECTION 1
DISASSEMBLY
Cabinet
Two claws
2
Bezel assembly
A
Three screws
4
(+BVTT 4 x 8)
EMI shield
6
Push the upper side of the cabinet
3
in the direction of arrow A, disconnect claws,
then remove the cabinet
lifting it up in the direction of arrow B.
B
Two screws
1
(+BVTP 4 x 16)
C
Slide the EMI shield in the direction
of arrow C and remove four claws.
21T3(E) 1-1