T3 (E) - Siemens AEP Service Manual

POWER SAVING FUNCTION
If your computer is equipped with power management, the monitor can support this func-
tion fully. Here the monitor does not distinguish between the individual energy-saving modes
of the computer (standby mode, suspend mode and OFF mode), as it is capable of immedi-
ately switching into the mode with the highest energy-saving effect.
Stage ON Energy-saving mode
Power indicator glows green glows orange
Function Monitor Monitor
operating is dark
normally
Power consumption normal 135 W reduced to < 3 W
If your PC detects inactivity (no input) it sends an appropriate signal to the monitor to
reduce the power consumption (energy-saving mode). The power indicator of the monitor
changes colour to indicate the status change.
Once an input is mode at the PC the screen contents are redrawn and full power is restored.
For detailed information on how energy-saving mode operates refer to the Operating Manual
or Technical Manual of your PC.
When the monitor is switched to the energy-saving mode by the power management system
a power consumption of up to 3 W is maintained to feed the circuit for redrawing the screen
contents.
To completely switch off the power consumption, switch off the monitor or the system unit.

21T3 (E) 4