Normal Recording - Sanyo Srt-8960P Instruction Manual

NORMAL RECORDING

Normal Recording
Before starting
œ Turn the power on to all devices used.
œ Load a cassette tape with its erasure-prevention tab
intact.
NOTES:
œ If "TAPE IN MODE" is set to "REC" in the
(GENERAL SET) menu, recording will start.
œ Press the ON SCREEN button to display the
superimpose display.
œ Set the "TAPE" item in the (GENERAL SET)
menu according to the duration of the tape used.
Press the REC/PLAY SPEED l (or j) button to set
1
the recording speed mode.
ø The recording speed mode appears on-screen
and on the digital display.
2
Press the REC button.
ø The record indicator "m" lights.
ø Recording starts.
ø If the tape end is reached while recording,
"OFF" is displayed on the digital display and the
unit goes into the mode set at the "TAPE END
MODE" setting in the (GENERAL SET) menu.
To cancel the "OFF" display, press the STOP,
EJECT or PLAY button or turn the SHUTTLE
ring.
ø When the end of the tape is reached, the TAPE
END OUT terminal output will be 0V. To cancel
the output, press the STOP button.
3
To stop recording, press the STOP button.
NOTES:
œ A tape recording made on this VCR may not play
back with the same degree of clarity on a real time
video cassette recorder from another manufacturer.
œ If you press the REC button and the loaded cassette
has no erasure-prevention tab, the VCR will eject the
cassette.
English
[Recording Speed Mode]
œ The available recording speed modes vary depending
on the VCR model. Refer to the "FEATURES" on
page 3 for the available recording speed modes for
your model of VCR.
(When the "TAPE" is set to "E-240" in the
(GENERAL SET) menu)
Maximum
Recording
recording
speed mode
duration
(hour mode)
(hours)
8 8
24 24
40 40
64 72
96 104
128 136
160 168
224 232
320 328
480 488
640 648
720 968
960 1288
000 Single image recording
(When the "TAPE" is set to "E-180" in the
(GENERAL SET) menu)
Maximum
Recording
recording
speed mode
duration
(hour mode)
(hours)
6 6
18 18
30 30
48 54
72 78
96 102
120 126
168 174
240 246
360 366
480 486
720 726
960 966
000 Single image recording
NOTE:
œ The tape speed display will vary according to the
"TAPE" item in the (GENERAL SET) menu setting. In
this manual, all the examples and displays used are
for when the "TAPE" item is set to "E-240". If set to
"E-180", please refer to the table above for the
corresponding durations and displays.
For example, if the recording speed mode is "8", then
the corresponding recording speed when set to
"E-180" will be "6", and, the counter reading of 8H
00M 00S will be 6H 00M 00S when set to "E-180".
19
Recording
Audio
interval Tape motion
recording
(second)
1/50
3/50 Possible Continuous
5/50
9/50
13/50
17/50
21/50
29/50
41/50 Not possible Intermittent
61/50
81/50
121/50
161/50
Recording
Audio
interval Tape motion
recording
(second)
1/50
3/50 Possible Continuous
5/50
9/50
13/50
17/50
21/50
29/50
41/50 Not possible Intermittent
61/50
81/50
121/50
161/50