Specifications - Sanyo Srt-8960P Instruction Manual

SPECIFICATIONS

General Specifications
Video head system
Audio recording
Tape speed
Specified video cassette tape
Recording/playback time (SRT-8960P only) 8, 24, 40, 64, 96, 128, 160, 224, 320, 480, 640, 960 and 1280 hours
Recording/playback time (SRT-8040P only) 8, 24 and 40 hours (when using E-240 tape)
Fast forward/rewind time
Television system
Video
Recording method
Video input
Video output
Horizontal resolution
Audio
Input
Output
Microphone input
Connectors
Alarm (1 shot) input
Control input
Series input
Ext timer (alarm reset) input
Common
Warning output
Control output
Tape end output
Timer output
Switch output
DC 12-24V "+" input (SRT-8960P only)
DC 12-24V "–" input (SRT-8960P only)
Remote control input
Dual-azimuth 4-head rotating helical scanning system:
Dual azimuth 2-head for record and standard playback
Dual azimuth 4-head for forward picture search, reverse picture search
and still mode
In 8-, 24- and 40-hour modes (when using E-240 tape)
In 6-, 18- and 30-hour modes (when using E-180 tape)
11.70 mm /sec (8-hour mode)
VHS 1/2 inch video cassette tape
(when using E-240 tape)
6, 18, 30, 48, 72, 96, 120, 168, 240, 360, 480, 720 and 960 hours (when
using E-180 tape)
6, 18 and 30 hours (when using E-180 tape)
approximately 2 minutes 35 seconds (when using E-240 tape)
approximately 2 minutes (when using E-180 tape)
PAL colour TV system
Luminance signal: FM recording
Chrominance signal: Down-converted direct recording
1 V(p-p), BNC, 75 Ω, unbalanced
1 V(p-p), BNC, 75 Ω, unbalanced
Black & white mode
Colour mode
– 8 dBs, RCA pin jack, 27 kΩ, unbalanced
– 8 dBs, RCA pin jack, 600 Ω, unbalanced
– 60 dBs, 3.5 mm mini jack, 10 kΩ, unbalanced
No voltage, make-contact switch input (Low input 100ms or more,
Normally 5 V)
Key code (pulse signal) (Normally 5 V)
No voltage, make-contact switch input (Low input 1s or more, Normally 5
V)
No voltage, make-contact switch input (Low input 100ms or more,
Normally 5 V)
0 V (GND)
Open collector Max. 500 mA (Active Low 0 V, Normally open)
Key code (pulse signal) (Normally 5 V)
Open collector Max. 50 mA (Active Low 0 V, Normally open)
DC 5 V, 5.7kΩ, (Low output)
Pulse signal (Normally 5 V)
DC 12 to 24V
DC 0 V
3.5 mm mini jack
52
350 line or more
250 line or more
English