Table of Contents
Advertisement
NORMAL RECORDING
Normal Recording
1
Turn the power on to all devices used.
2
Load a cassette tape with erasure-prevention tab.
NOTE:
•
If in the (SET UP 3) menu, TAPE IN MODE is set
to "REC", recording will start.
3
Set the ON SCREEN switch to the "ON" position.
4
Press the REC/PLAY SPEED button to set the
recording speed.
°
The recording speed is displayed on-screen
and on the digital display.
GB
5
Press the REC button.
The Record indicator (a) lights.
°
Recording starts.
°
6
To stop recording, press the STOP button.
NOTES:
•
A tape recorded on this VCR cannot be played back
on a time lapse VCR produced by another
manufacturer.
•
If you press on the REC button and the loaded
cassette has no erasure-prevention tab, the VCR will
eject the cassette.
•
During recording, the AUDIO ON/MENU button will
not function (the menu cannot be displayed).
•
During recording, the tape speed cannot be changed.
English
[Recording Speed]
Maximum recording
Recording
duration (with an E-180
speed
cassette tape)
Standard
3
3 hours
mode
12
Time lapse
24
mode
TAPE COUNTER NOTES:
•
There is no tape counter indication for the blank
portions of the tape.
•
In the 3-hour recording speed mode only, the tape
counter indicates real hours, minutes and seconds.
•
In the other recording speed modes, the tape counter
indication is a ratio of the 3-hour mode base
indication. (In 12-hour recording mode, each "second"
of the tape counter actually represents approximately
(12/3)+1 = 5 real seconds.)
•
There may be a slight discrepancy between the
position shown on the tape counter and the actual
tape position.
•
When rewinding the tape past the "0:00:00" position,
a minus (–) sign will be displayed.
Record Pause
Recording can be interrupted temporarily.
1
Press the PAUSE/SCAN button during recording.
The Pause/Still indicator (
°
NOTES:
•
The image appears on-screen but it is not
recorded.
•
If a recording pause continues for 5 minutes or
more, the VCR will go into stop mode to avoid
damaging the tape.
2
To resume recording, press the REC button, or
press the PAUSE/SCAN button again.
11
Recording
Audio
Tape motion
interval
recording
1/50 second
Possible
Continuous
15
0.1
27
0.18
:
) blinks.
Advertisement
Table of Contents
