Using Operation Bar - Panasonic BL-C30C Operating Instructions Manual

1.2.3

Using Operation Bar

End Display When the pan/tilt has reached the end (Left
and Preset End, Right End, Up End and Down End), End
Display: Display appears. When clicking a preset
button, the preset name appears.
Pan/Tilt
Moves the lens throughout the horizontal (
Scan:
or vertical (
original position.
Pan/Tilt/ Controls lens direction.
Home
Pan (
Position:
Preset Applies the camera direction to a preset
Button: position. You can preset 8 positions (see page
19—page 22).
Sensor When the sensor detects a temperature
Position: difference, the camera can be set up to turn to
this position. Only an administrator can
operate it (see page 19).
Brightness: Changes brightness in nine steps including
[STD] (Standard). Clicking [-] or [+] changes
the image brightness.
Refresh Sets a refresh interval. (Motion—60-second
Interval: interval)
Resolution: Selects [640 x 480] or [320 x 240] (default)
pixels.
Image Selects the image quality.
Quality:
•
•
•
) range, and returns to the
: Left, : Right), Tilt (
: Down) and Home Position (
[Favor Clarity] optimizes the image for
good clarity.
[Standard] keeps the standard quality.
(default)
[Favor Motion] optimizes the image for
motion display.
Operating Instructions
)
: Up,
: Center)
17