Camera (Optional); Features Of The Camera - Panasonic VL-SW102BX Operating Instructions Manual

Camera (optional)

Features of the camera

Camera monitor:
You can monitor the image and sound of the other room where the camera is located by using the main monitor station or the
sub monitor station. The quality of the images taken by the camera is a little lower than the quality of the images taken by the
door station.
When the camera sensor detects temperature variations:
The ringer tone sounds and the image taken by the camera is displayed on the main monitor station and the sub monitor
station.
The image taken at the time of detection and 3 more images (4 images in total) are automatically recorded at about a 3
second interval after detection. Even if you do not answer a call, the image is recorded and you can review the recorded
image anytime (page 30).
Camera image displayed on the main monitor station:
4 refreshed images taken by the camera are displayed on the main monitor station every 3 seconds. You can select either "4
PICTURES" (default setting) or "1 PICTURE" in the function setting for "NUMBER OF CAMERA PICTURES" (page 39).
The image quality of "1 PICTURE" is lower than "4 PICTURES" because the image of "1 PICTURE" is enlarged to the full
display size.
Note:
L� Y ou can zoom in the image from the camera. This feature must be set beforehand: ("ZOOM" on page 40).
L� W hen the sensor detects, the camera sounds a ringer tone "CAMERA RINGER". You can change the ringer pattern:
("CAMERA RINGER" on page 40) or the ringer volume: ("CAMERA RINGER VOLUME" on page 40).
L� A fter detecting motion, the sensor does not detect for about 60 seconds. You can change the time interval of detection:
("SENSOR TYPE" on page 40).
L� T he automatic recording mode can be deactivated: ("SENSOR TYPE" on page 40).
26