General Information; Technical Data About This Product - Panasonic VL-SW102BX Operating Instructions Manual

Technical data about this product

Main monitor station
Power supply:
Current consumption:
Dimensions:
Mass (Weight):
Operating environment:
Installation method:
External material:
Frequency:
Note:
L� B efore connecting to a door opener, make sure the door opener is as follows:
– S1/S2 terminal: Normally open/Actively short
– Less than 30 V AC (1 A), 24 V DC (1 A)
– S1/S2 terminal on the main monitor station is not the power supply to the door opener. If the door opener needs a power
supply device to connect to the main monitor station, contact the dealer where you purchased the door opener.
Sub monitor station
Power supply:
Dimensions:
Mass (Weight):
Operating environment:
External material:
Frequency:
Door station
Dimensions:
Mass (Weight):
Operating environment:
Installation method:
External material:
Charger
Power supply:
Dimensions:
Mass (Weight):
Operating environment:
External material:
Note:
L� D esign and specifications are subject to change without notice.
L� T he pictures and illustrations in these instructions may vary slightly from the actual product.
Trademarks:
L� A ll other trademarks identified herein are property of their respective owners.
(VL-MW102BX)
220 – 240 V AC, 50 Hz
Standby: Approx. 0.02 A
During operation: Approx. 0.15 A
Approx. height 188 mm x width 165 mm x depth 41.5 mm
Approx. 760 g
0 °C to 40 °C, Up to 90% RH (Relative Humidity) non condensing
Wall mount (Wall mount bracket included)
Flame retardant ABS resin (panel: acrylic resin)
2.402 GHz – 2.481 GHz
(VL-W600BX)
Ni-MH battery (3.6 V DC / 650 mAh)
Approx. height 157 mm x width 52 mm x depth 35 mm
Approx. 175 g
0 °C to 40 °C, Up to 90% RH (Relative Humidity) non condensing
ABS resin
2.402 GHz – 2.481 GHz
(VL-GC001BX-S)
Approx. height 165 mm x width 90 mm x depth 35 mm
Approx. 330 g
-10 °C to 50 °C, Up to 90% RH (Relative Humidity) non condensing
Wall mount (Wall mount bracket included)
Aluminum
AC adaptor PQLV206BX (100 – 240 V AC, 50/60 Hz)
Approx. height 115 mm x width 76 mm x depth 90 mm (using with the stand)
Approx. height 105 mm x width 76 mm x depth 48 mm (using without the stand)
Approx. 115 g (including the stand)
0 °C to 40 °C, Up to 90% RH (Relative Humidity) non condensing
ABS resin

General Information

61