Table of Contents
Advertisement
Preparation
Setting the date and time
This unit has a recording function. The date and time will not be recorded when recording unless they are set. You can set the
date and time using the main monitor station.
1
During standby, press and hold {SET} for about 3 seconds.
2
Select "OTHER" by pressing {▼} or {▲}.
3
Press {D} then select "TIME AND DATE" by pressing {▼} or {▲}.
4
Press {D} then set the current date and time.
{ } { }: Select the location for hour/minute/day/month/year.
{ } {▲}: Select numbers.
(You can scroll numbers quickly by pressing and holding { } or {▲}.)
5
Press {D} after finishing the setting.
L� T he screen in step 3 is displayed.
6
Press {OFF}.
Note:
L� T ime may shift about 60 seconds per month.
20
{OFF}
{D}
{SET}
{ } { }
{ } {▲}
(Example)
Advertisement
Table of Contents
