Recording; Recording An Image; Lauto Recording - Panasonic VL-SW102BX Operating Instructions Manual

Wireless video intercom system
Hide thumbs Also See for VL-SW102BX:
Table of Contents

Advertisement

Recording

Recording an image

The main monitor station can record (save) up to 100 images from the door station or the camera (optional) in total.
When the camera is registered, you can store up to 30 images from the door station and up to 70 images from the camera
separately ("PICTURE RECORD ALLOCATION" on page 41).
Auto recording
When you receive a call in standby mode, images are automatically recorded with the following timing. (Even if you do not
answer a call, the image is recorded and you can review the recorded image anytime.)
N
When receiving a call from the door station:
One image is recorded after about 2 seconds when receiving a door call.
L� T he number of images to be recorded can be changed to 4 images ("DOOR STATION PICTURE REC NUMBER" on
page 41).
N
When receiving a call from the camera (optional):
The image taken at the time of detection and 3 more images (4 images in total) are recorded at about 3 second interval
after the sensor detects motion.
L� T he number of images to be recorded cannot be changed.
Note:
L� I f you do not answer a call, the main monitor station and the sub monitor station notify you that an unviewed image has
been recorded as follows.
VL-MW102BX
Main monitor station: {D} is flashing.
DOOR KEY
DOOR
CAMERA
OFF
TALK
– � W hen you have viewed the recorded image (page 32), {D} on the main monitor station goes off.
(The message and icon on the sub monitor station disappear if you have viewed all images.)
– � Y ou can allow {D} to not flash or flash only when an unviewed image from either the door station or the camera remains
("FLASHING PLAY BUTTON" on page 39).
L� I f you receive another call while monitoring or during conversation, the image is not recorded unless you answer the call. If
you answer the call, the image is recorded with the following timing.
– When receiving a call from the door station: 1 or 4 image(s) that is(are) displayed after pressing {DOOR} is(are)
recorded.
– When receiving a call from the camera: 4 images are recorded after pressing {CAMERA}.
• The first image is the one taken at the time of detection.
L� Y ou can deactivate the auto recording feature ("DOOR STATION AUTO RECORDING" on page 41, "SENSOR TYPE" on
page 40).
L� I f you receive a call from another device while recording, all 4 images may not be recorded. (At least one image is
recorded.)
Auto image update:
If a new image is recorded when 100 images are already stored, the oldest image (including unviewed images) is
automatically erased.
Note:
L� Y ou can protect the image that you do not want to erase (page 32).
L When "PICTURE RECORD ALLOCATION" is set to "YES" (page 41):
If a new image from the door station is recorded when 30 images from the door station and 70 images from the camera are
already stored, the oldest image from the door station will be erased.
30
VOICE
CHANGER
BRIGHT/
SET
(
HOLD 3 SEC
)
PAGE
VOLUME
Flashing
Sub monitor station: Message and icon appear on the display.
When you press {OFF} during standby,
the display appears.
← (Example)
The image taken by the door station that
has not been viewed remains.

Advertisement

Table of Contents
loading

Table of Contents