Cleaning Before Use; Before Using Your Wine Cooler - Logik LWC25S10 Instruction Manual

Cleaning Before Use

Wipe the inside of the wine cooler with a weak solution of bicarbonate soda. Then rinse with
warm water using a 'wrung-out' sponge or cloth. Wipe completely dry before replacing the
shelves and salad bin. Clean the exterior of the wine cooler with a damp cloth.
If you require more information refer to the CLEANING section.
• Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the wine
cooler.
• Before Turning On!
Do not turn on until two hours after moving the wine cooler. The coolant fluid needs time
to settle.

Before Using Your Wine Cooler

Before placing any wine in your wine cooler, turn it on and wait for 24 hours, to make sure it
is working properly and to allow the wine cooler to fall to the correct temperature. Your wine
cooler should not be overfilled.
GB-6