Handle Assembly; Levelling The Wine Cooler - Logik LWC25S10 Instruction Manual

Handle Assembly

1. Take out the handle and 2 screws.
2. Hold the handle onto the door edge and tightened
with the screws provided.

Levelling the Wine Cooler

To do this use the two levelling feet at the front of
the wine cooler.
If the wine cooler is not level, the door and
magnetic seal alignments will not be covered
properly.
Shelves and Bottle Rack Installation
Place the bottle rack at the bottom of the
compartment first, and then place the shelves one
by one onto the side ribs inside the compartment.
GB-5