Download Print this page

Kettler Kabrio Assembly Instructions Manual page 3

Kettler kettcar "kabrio" assembly instructions

Advertisement

Assembly Instructions
■ In case of Kettcar® without a free-wheel consider the fact that the pedals will rotate even
when the Kettcar® is pushed.
■ Do not transport any objects on the Kettcar®.
■ Always adjust the use of the Kettcar® to the conditions encountered.
■ Kettcar® do not possess a continuously effective brake system. Therefore, safeguard the
Kettcar® against rolling away when parking it. Never park the Kettcar® unattended with a
child on it!
■ Never draw the Kettcar® behind you as long as a child is seated on it.
■ Instruct your child how to use the vehicle correctly and draw attention to possible sources of
danger.
■ Although dangerous situations are unlikely to occur if the product is used correctly, children
at play should, if possible, be supervised.
■ Please bear in mind that there is always a danger of children injuring themselves while using
swings, climbing frames,toy vehicles or similar equipment.
■ When children are at play, situations may arise which cannot be predicted by the manu-
facturer and for which he cannot be held responsible.
■ Before use, always check all screws and plug-in connections as well as respective safety
devices fit cor rectly.
■ Never use corrosive or abrasive substances to clean the Kettcar®. Never use substances
which may cause pollution of the environment.
■ For models with pneumatic tires: Due to the nature of materials used in pneumatic tires, it is
not rec ommended for the product to be left in any one place for too long where solvents or
other chemicals, i. e. oil, may lie. This may result in a chemical reaction, which could cause
the tires to mark the sur face such as a vinyl flooring. If in doubt put something underneath
the wheels to cover the floor. Ensure that air pressure in the tires is correct; if air pressure is
too low this increases wear, and makes riding the Kettcar® more difficult!
■ Lubricate the bearing sleeves of the wheels and the handlebars with a few drops of oil every
two or three months.
Assembly of the toy vehicle
■ Please ensure that the vehicle will only be used for playing when assembly has been carried
out cor rectly, and checked, by an adult.
■ The Kettcar® must be assembled carefully by an adult person. Study the assembly instruc-
tions care fully before beginning work. Assemble the vehicle in the exact sequence shown by
the letters in the di agrams. This is essential for the safe function and use of the Kettcar®.
■ Please note that there is always a danger of injury when working with tools or doing manu-
aln work. Therefore please be careful when assembling this product.
■ Ensure that your working area is free of possible sources of danger, for example don't leave
any tools lying around. Always dispose packaging material in such a way that it may not
cause any danger. There is always a risk of suffocation if children play with plastic bags!
Assembly Instructions
■ Bolt all the parts together loosely at first, and check that they have been assembled correctly.
Tighten the locknuts by hand until resistance is felt, then use wrench to finally tighten nuts
completely against resistance (locking device). Then check that all screw connections have
3

Advertisement

loading

This manual is also suitable for:

08857-090