Introduction - LG StudioWorks 78DT5 User Manual

Introduction

Thank you for purchasing an GoldStar high resolution monitor. It will
give you high resolution performance and convenient reliable opera-
tion in a variety of video operating modes.
Features
The StudioWorks 78DT5 is a 17-inch (16.0 inches viewable ) intelli-
gent, microprocessor based monitor compatible with most analog
RGB (Red, Green, Blue) display standards, including IBM PC , PS/2 ,
® ®
Apple , Macintosh , Centris , Quadra , and Macintosh II family. It can
® ® ® ®
also be used with a Sun SPARC workstation as well as other sources
using the 5 BNC connectors. The monitor provides crisp text and vivid
color graphics with VGA, SVGA, XGA, and VESA Ergo modes (non-
interlaced), and most Macintosh compatible color video cards when
used with the appropriate adapter.
The monitor's wide compatibility makes it possible to upgrade video
cards or software without purchasing a new monitor.
Digitally controlled auto-scanning is done with the microprocessor for
horizontal scan frequencies between 30 and 85KHz, and vertical scan
frequencies between 50 and 120Hz. The microprocessor-based intel-
ligence allows the monitor to operate in each frequency mode with the
precision of a fixed frequency monitor.
The microprocessor-based digital controls allow you to adjust
conveniently a variety of image controls by using the OSD (On
Screen Display).
The monitor is shipped with 8 factory pre-programmed video modes
that are permanently resident, and another 8 are set at the factory,
but may be overwritten to make more room. In addition, there are 24
user storable modes, for a total of 40 memory modes.
This monitor is capable of producing a maximum horizontal resolution
of 1600 dots and a maximum vertical resolution of 1280 lines. It is
well suited for CAD work and sophisticated windowing environments.
For greater user health and safety, this monitor complies with the
stringent Swedish TCO '95 requirements for low radiation emissions.
For low cost of monitor operation, this monitor is certified as meeting
the EPA Energy Star requirements, and utilizes the VESA Display
Power Management Signalling (DPMS) protocol for power saving
during non-use periods.
1