On Screen Display (Osd) Control Adjustment - LG StudioWorks 78DT5 User Manual

On Screen Display (OSD) Control Adjustment

Making adjustments to the image size, position and operating param-
eters of the monitor are quick and easy with the On Screen Display
Control system, using only the Enter button and Adjustment Control
knob. A quick example is given below to familiarize you with the use
of the controls. Following this section is an outline of the available
adjustments and selections you can make using the OSD.
Note: (Monitor and PC should be ON, with an image or prompt on the
screen.) Rotating the Adjustment Control knob clockwise one click will
present you with the Main Menu1 of the On Screen Display system,
with the first item highlighted (red color). The main picture
area will also show the selected icon and a brief description (here H-
SIZE). If you turned the control more than one click, a different icon
may be highlighted (red color). Move the control until the icon is
selected. The OSD system should look like :
H - S I Z E
e n t e r : s e l e c t :
To adjust this item, press the Enter Button once.
The display will look like:
H - S I Z E
1 2 7
1 2 8 0 X 1 0 2 4 7 5 H z
m a i n : a d j u s t :
The bar graph shows you the current level of the selected H-SIZE control.
The OSD also tells you the resolution mode you are using and the refresh
rate. Use the Adjustment control knob to increase or decrease the level to
fit the screen or your desired size. When you are done, press the Enter
( ) button once to return to Main Menu1 to make another selection. If
you are have finished using the OSD after you have returned to Main
Menu1, you can use the Enter button to exit the OSD.
11