Note When Setting Up - Panasonic KX-TG4111C Operating Instructions Manual

Digital cordless phone digital cordless answering system
Hide thumbs Also See for KX-TG4111C:
Table of Contents

Advertisement

TG41xxC(e).book Page 11 Wednesday, December 22, 2010 3:59 PM
Battery installation
L USE ONLY Ni-MH batteries AAA (R03)
size.
L Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
L Confirm correct polarities (S, T).
Rechargeable Ni-MH ONLY
L When the language selection is
displayed, see page 14.
Battery charging
Charge for about 7 hours.
L When the batteries are fully charged, the
charge indicator goes off and "Fully
charged" is displayed.
Confirm "Charging" is displayed.
Charge indicator
Getting Started

Note when setting up

Note for connections
L The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
L The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
During a power failure
The unit will not work during a power failure.
We recommend connecting a corded-type
telephone (without AC adaptor) to the same
telephone line or to the same telephone line
jack using a T-adaptor.
Note for battery installation
L Use the supplied rechargeable batteries.
For replacement, we recommend using the
Panasonic rechargeable batteries noted on
page 4, 7.
L Wipe the battery ends (S, T) with a dry
cloth.
L Avoid touching the battery ends (S, T) or
the unit contacts.
Note for battery charging
L It is normal for the handset to feel warm
during charging.
L Clean the charge contacts of the handset,
base unit, and charger with a soft and dry
cloth once a month. Clean more often if the
unit is exposed to grease, dust, or high
humidity.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents