Advertisement
Quick Links
Advertisement
Related Manuals for Broseley VERONA 8
Summary of Contents for Broseley VERONA 8
- Page 1 INSTALLATION AND OPERATION INSTRUCTIONS FOR: VERONA 8 STOVE PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING, OPERATING OR SERVICING THIS APPLIANCE. This appliance must be installed and commissioned by a fully qualified, registered engineer. ISSUE 09-C © 2007-2008 Broseley Fires Ltd...
-
Page 2: Table Of Contents
Failure to comply with these requirements may void the warranty. Please note that it is a requirement under the Broseley Fires Ltd’s warranty system that the installation of the stove is carried out under by a Competent Person registered with a Government approved Competent Persons Scheme. -
Page 3: Technical Data
This appliance has been developed to burn wood as its primary fuel source.. The VERONA 8 is made primarily from cast iron with plates of sheet steel. The fire chamber is internally lined with cast iron firebricks. There is a riddling grate for clearing ash. The stove is equipped with ceramic glass (resistant up to 700 ºC) this provides an exceptional view of the combustion, whilst also preventing sparks and smoke deposits... -
Page 4: Heatable Area (Volume
• It is also important to ensure that the dwelling to be heated is insulated and is as energy efficient as is practical. • The correct fuel must be used. The selection, installation, correct use and maintenance of solid fuel appliances and flue systems are discussed in more detail in the following sections of these instructions. © 2007-2008 Broseley Fires Ltd... -
Page 5: The Controls
This appliance is designed to burn wood as its primary fuel source. You need to use good quality fuel in order to get the best results from your stove. Seek advice from your local fuel merchant. He will be able to advise you on what fuel to use. © 2007-2008 Broseley Fires Ltd... -
Page 6: Burning Wood
12. USING YOUR STOVE - IMPORTANT NOTES: This appliance must be installed and commissioned by a fully qualified, registered engineer. HETAS engineers are recommended by Broseley Fires. For your nearest search www.hetas.co.uk THE SURFACES OF THIS APPLIANCE GET HOT WHEN IN USE. PLEASE ENSURE THAT CHILDREN, THE ELDERLY AND THE INFIRM ARE MADE AWARE OF THIS. -
Page 7: Ash Removal
For the more stubborn stains, a mildly abrasive cleaner should be used, such as ‘Astonish’. This is safe to use on enamel surfaces. Do not use Astonish on the chrome components. For any further information, please contact your Dealer! © 2007-2008 Broseley Fires Ltd... - Page 8 They should be replaced if they are showing excessive signs of fraying and are not making a good seal. They are glued into position using a high temperature, flexible, silicone sealant 17H. AIR CONTROLS: Ensure that all the air controls operate smoothly and are free from ash or other foreign bodies. © 2007-2008 Broseley Fires Ltd...
-
Page 9: Installation Of The Appliance
Tar stains may appear on the surface of the chimney breast inside the property. 18 C. SITING THE APPLIANCE This appliance must not be fitted into a location where it will be impossible to service. The location must comply with the requirements laid down in the building regulations. © 2007-2008 Broseley Fires Ltd... - Page 10 (aspirating); may negatively affect the functions of your appliance. If the room contains more than one appliance; of the type that requires combustible air; a calculation will need to be made to re-calculate the permanent air vent requirement. © 2007-2008 Broseley Fires Ltd...
- Page 11 18 F. Fitting the Spigot and Blanking Plate TOP OUTLET REAR OUTLET © 2007-2008 Broseley Fires Ltd...
-
Page 12: Annual Service Record
COMPANY ADDRESS: POSTCODE: 4TH YEAR SERVICE completion date: SERVICE ENGINEER: . . REG. No. COMPANY NAME: COMPANY ADDRESS: POSTCODE: 5TH YEAR SERVICE completion date: SERVICE ENGINEER: . . REG. No. COMPANY NAME: COMPANY ADDRESS: POSTCODE: © 2007-2008 Broseley Fires Ltd... - Page 13 Should you wish to claim under the warranty, please contact the supplier / dealer from whom you purchased the appliance from. Do not claim directly to Broseley Fires, as they are unable to process any direct claim from an end user.