Main Picture Source Selection - Zenith D60WLCD Installation And Operating Manual, Warranty

Main Picture Source Selection

Changes the picture source for the main screen so you
can watch your off-air TV, cable TV, VCR, DVD, or any
other devices that you have hooked up to your TV.
You can also change the picture source with the Source
buttons on the remote control.
Press the MENU button on the remote
1
control, then use the UP/DOWN arrow
button to select the Setup menu.
Press ENTER or the RIGHT arrow button
2
to access the Setup menu.
Use the UP/DOWN arrows to select Main
3
source.
Press ENTER or the RIGHT arrow to
4
access the Main source menu, then use
the UP/DOWN arrow button to select the
source. Your picture source options are :
Ant/Cable 1 (Ant/Cable 2), Video 1,
Video 2, Front Video, Component 1,
Component 2, RGB-PC and RGB-HD/STB.
Press EXIT to save and return to TV view-
5
ing or press the LEFT arrow to save and
return to the previous Menu.
P A G E 2 2
tv vcr cable dvd sat
mode light
power
source
antenna video front
comp1 comp2
1 2 3
4 5 6
7 8 9
0
enter
mute
vol ch
swap pipch- pipch+ pip
flashbk surf freeze
menu
1
exit
record stop skip
pause rew
play
rgb
2/4
ratio
1/3
2/4
5
ff
206-03726