Ant/Cable Hookup - Zenith D60WLCD Installation And Operating Manual, Warranty

ANT / CABLE SERVICE Hookup
Connect an antenna and/or cable service
1
wire to your Entertainment Machine as
shown.
Turn to page 26 to do a channel search
2
with EZ Scan for ANT / CABLE
connection(s).
If you receive your RF signal
through an antenna that is several
years old and connects with two
small prongs, you will need to pur-
chase a 300 to 75 Ohm adapter. It
should be available from your local
electronics dealer.
Zenith recommends using a 75
ohm cable for your antenna con-
nections in order to prevent
interference.
For best signal reception, have your Antenna professionally adjusted.
P A G E 1 0
Antenna
RF coaxial wire
(75ohm)
RF coaxial wire
(75ohm)
ANT/CABLE2
INPUT
Cable TV
wall jack
ANT/CABLE1
LOOP OUT
INPUT
206-03726