Auto Clock Setup - Zenith D60WLCD Installation And Operating Manual, Warranty

Auto Clock Setup

Sets the time automatically through the PBS broadcast
signal.
The PBS channel signal includes information for the cor-
rect time. Enter the local PBS channel number with the
number buttons on your remote control.
Press the MENU button on the remote
1
control, then use the UP/DOWN arrow
button to select the TIME menu.
Press ENTER or the RIGHT arrow button
2
to activate the TIME menu.
Use the UP/DOWN arrow button to
3
choose Auto clock, then press ENTER or
the RIGHT arrow button to activate the
Auto Clock option then use the
UP/DOWN arrow button to make your
auto clock selection.
• Use the number buttons to set the
PBS channel.
• Time Zone - Lets you select the time
zone of your viewing area.
• Daylight Savings - Lets you set
Daylight Savings On or Off, depending
on whether or not your viewing area
observes Daylight Savings.
• If you select Auto Clock, use the
RIGHT arrow to choose On or off.
If you select on, select the SET and then
4
press the ENTER button. If you select
off, press EXIT to return to TV viewing or
press the ENTER button to save and
return to the previous menu.
Your choices are saved when Auto Clock
5
is set.
P A G E 3 8
tv vcr cable dvd sat
mode light power
source
video front
antenna
comp1 comp2 rgb
1 2 3
4 5 6
7 8 9
0
enter
mute ratio
vol ch
swap pipch- pipch+ pip
flashbk surf freeze
menu
1
exit
record stop skip
pause rew
play ff
3
2/3/4
1
2/3
4
206-03726