Picture Menu Options - Zenith Z15LCD1 Installation And Operating Manual, Warranty

Operation

Picture Menu Options

When the input source is in PC mode(Only for Z15LCD1) ，you can select Brightness, Contrast, Position,
Video noise, Sharpness, Info, Color Temp., Red, Green, Blue and Reset to default; shown in
the figure below:
1. Brightness and Contrast: The range can be adjusted from 0~100.
2. Position: There are two options, Horizontal and Vertical, which can be adjusted from -50 to +50.
3. Video noise: There are two options, Phase and Clock, which can be adjusted from -50 to +50.
4. Sharpness: Select from 6 options of Sharp, Sharpest, Auto, Softest, Soft and Normal. You may adjust
the above options according to your preference.
5.
Info: Prompt the current size for PC input definition (only the definition that can be shown by this device).
6.
Color Temp.: There are four options of colour temperature provided for users - Warm, Normal, Cold
and user. You can select the three colour temperatures of Warm, Normal and Cold, or manually adjust
red, green or blue in the user setting (you can only adjust red, green and blue in the user setting).
7.
Reset to default: It is used to reset the picture settings to the factory default mode.
When the input source is in TV/Video/S-Video mode, you can select Brightness, Contrast, Color, Sharpness,
Tint, Dyn. skin tone,Temperature and Reset to default respectively; shown in the figure below:
18