Assembly - Shark SK460 series Owner's Manual

fig. 2
fig. 1
IMPORTANT: Always make sure that
the Professional Steam & Spray
UNPLUGGED from the wall when not in use.
Never change or remove the cleaning pad when
the appliance is plugged into the wall. Use
ONLY Steam Energized
™
of other chemicals or cleaning solutions may
damage the appliance, void the warranty and
could be unsafe for you and your family.
fig. 3
Mop is
™
Cleanser. The addition
fig. 4

ASSEMBLY

1 Insert the handle into the neck of the main body
of the Professional Steam & Spray
the mop handle and main body of the appliance
together until you hear it "click" into place.
(Fig. 1)
2
Insert the power cord plug into the power cord
receptacle on the unit. (Fig. 2)
3
Hold the power cord and wrap it around the cord
holders. (Fig. 3)
4
Remove the battery cover and insert the 4 AA
batteries. (Fig. 4) Replace the battery cover.
5
Place the Professional Steam & Spray
on top of the cleaning pad. (Fig. 5)
If using the washable cleaning pad, ensure that
the Velcro side is facing up and the tab is in
®
the back. If using the Sanifiber
ensure that the logo side is facing up.
www.sharkclean.com
Cleaning Pad
fig. 5
Mop. Push
™
Mop unit
™
disposable pad,
™
3