On surfaces that have been treated This steam mop has a polarized plug (one blade is wider than the other). As a 20. DO NOT put any objects into the with wax and on some unwaxed safety feature, this plug will fit into a polarized outlet only one way.
ASSEMBLING YOUR STEAM & SCRUB When assembling your steam mop, there may be a little water in or around the water tank. This is because we test all our steam mops before you buy them, so you get a quality Shark Steam &...
Page 4
Steam & Scrub steam mop has 3 unique Intelligent Steam Control settings so you ® can select the ideal amount of steam to use for each cleaning task. In NORMAL mode, the pads will spin faster and more steam will be produced than in LIGHT mode. In DEEP mode, the pads will spin the fastest and the maximum amount of steam will be produced.
10). or tumble-dried on a low setting, as this will 3 After the unit has cooled and the steam has extend the life of the microfiber fabric been released, empty the water tank before (fig.
Assembling Your Steam & Scrub section to reinstall wobbling. the pads. If your steam mop shuts off while in use, it likely needs to cool down. Perform the following steps before you restart cleaning: 1. Turn the steam mop off, unplug it, and remove pads.
Page 7
NOTES NOTES s h a r kc l e a n . c o m s h a r kc l e a n . c o m...
(Keep receipt) What is not covered by this warranty? Normal wear and tear of wearable parts (such as Shark Cleaner, Pad, etc.), which require regular Store of Purchase: ������������������������������������������������������������������������������������������ maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this warranty.
Need help?
Do you have a question about the STEAM and is the answer not in the manual?
Questions and answers