Assembly - Shark SK410 series Owner's Manual

fig. 3
fig. 2
fig. 1
IMPORTANT: Always make sure that the
Steam & Spray Mop is UNPLUGGED from the
™
wall when not in use. Never change or remove
the cleaning pad when the appliance is plugged
into the wall. Use ONLY Steam Energized
Cleanser. The addition of other chemicals or
cleaning solutions may damage the appliance,
void the warranty and could be unsafe for you
and your family.

ASSEMBLY

1 Insert the handle into the neck of the main
body of the Steam & Spray
handle and main body of the appliance together
until you hear it "click" into place. (Fig. 1)
2 Insert the power cord plug into the power cord
™
receptacle on the unit. (Fig. 2)
3 Hold the power cord and wrap it around the cord
holders. (Fig. 3)
4 Remove the battery cover and insert the 4 AA
batteries. (Fig. 4) Replace the battery cover.
5 Place the Steam & Spray
Cleaning Pad. (Fig. 5)
If using the washable cleaning pad, ensure that
the Velcro ®
the back. If using the SaniFiber
ensure the logo side is facing up.
fig. 4
Cleaning Pad
fig. 5
Mop. Push the mop
™
Mop unit on top of the
™
side is facing up and the tab is in
cleaning pad,
™
www.sharkclean.com 3