Table of Contents
Advertisement
2-3. Adjusting Color
●
To select the display mode (color mode)
This function allows easy selection of a desired mode according to monitor application.
Display Modes
Mode
1-Custom
®
2-Adobe
RGB
3-sRGB
4-EBU
5-REC709
6-SMPTE-C
7-DCI
8-CAL
Note
• In CAL mode, ColorNavigator and SelfCalibration can be used for adjustment. (See
• Available CAL mode differs depending on each input signal.
Attention
• Avoid operating any function of the monitor while using ColorNavigator.
Procedure
1. Press
.
The mode menu appears at the bottom left of the screen.
2. The mode among the list is highlighted in turn each time
You can switch the mode with
Note
• The Adjustment menu and the Mode menu cannot be displayed at the same time.
• You can disable a specific mode to be selected. For more information, see
(page
32).
Availableforthecolorsettingsaccordingtoyourpreference.
SuitableforcolormatchingwithAdobe
SuitableforcolormatchingwithsRGBcompatibleperipherals.
SuitableforreproducingthecolorgamutandgammaassetforthbyEBU(European
BroadcastingUnion)standards.
SuitableforreproducingthecolorgamutandgammaassetforthbytheITU-RRec.709
standard.
SuitableforreproducingthecolorgamutandgammaassetforthbySMPTE-Cstandards.
SuitableforreproducingthecolorgamutandgammaassetforthbyDCIstandards.
Displaysthescreenadjustedby"ColorNavigator"calibrationsoftware.
Example:AtDVIinput
Themodemenu
appears.
1-Custom←→2-Adobe
8-CAL←→7-DCI←→6-SMPTE-C←→5-REC709
or
while the mode menu is displayed.
Purpose
®
RGBcompatibleperipherals.
®
RGB←→3-sRGB←→4-EBU
is pressed.
"3-1. Enabling/Disabling Mode Selection"
"Chapter 4 SelfCalibration" (page
Chapter2AdjustingScreens
37))
17
Advertisement
Table of Contents
