Advertisement
OPERATION
WARNING!: To reduce the risk of serious personal injury, read, understand and follow all
important safety warnings and instructions prior to using this tool.
SWITCH
To turn the tool ON, push the portion of the switch marked "l" and to turn the tool OFF,
push the portion of the switch marked "0".
NOTE: Always return the switch to the "OFF" position before changing accessories or
adjusting.
OPERATION
Grasp the sander and turn it ON. Move it in long, sweeping strokes along the surface,
letting it do the work. Pushing down on the tool while sanding actually slows the removal
rate and produces an inferior quality finish. Check your work often. This sander is
capable of removing material rapidly.
DUST COLLECTION
Your sander comes equipped with a cloth dust bag to collect the dust generated while
sanding. To attach the dust bag to the sander, fit it firmly onto the dust port at the back of
the sander. To empty the dust bag, remove it from the dust port and dump the sanding
debris into an appropriate trash receptacle. You may, if you prefer, attach a vaccum
cleaner to the tool to collect the dust as you sand. Simply remove the dust bag and install
the vaccum hose over or into the dust port. Shop vaccums come with two diameters of
hoses and the dust port is designed to accept them both.
MAINTENANCE
Use only mild soap and a damp cloth to clean the tool. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustments should be performed by authorized service centers or other qualified service
organizations, always using identical replacement parts.
PARTS DIAGRAM & PARTS LISTS
Refer to the Parts section of the King Canada web site for the most updated parts diagram
and parts list.
Advertisement
