Prefix/Suffix Values - Motorola Symbol CS3000 Series Product Reference Manual

3 - 18 Symbol CS3000 Series Scanner Product Reference Guide

Prefix/Suffix Values

Parameter # P = 0x69, S1 = 0x68, S2 = 0x6A
Append a prefix and/or one or two suffixes to scan data for data editing. To set these values, scan a four-digit
number (i.e., four bar codes) that corresponds to ASCII values. See
Codes on page 4-48. To change the selection or cancel an incorrect entry, scan
Prefix/Suffix values via serial commands, see
NOTE In order to use Prefix/Suffix values, set the
NOTE The CS3000 series scanner does not support ADF, however it does allow setting prefix and suffix values
via parameter bar codes.
Table B-6 on page B-7
Setting Prefixes and Suffixes on page
Scan Data Transmission Format on page
Scan Prefix
Scan Suffix 1
Scan Suffix 2
Data Format Cancel
and Numeric Bar
Cancel on page 4-50. To set the
B-7.
3-19.